View Single Post
Old 10-18-2020, 12:39 PM   #1
Joe Immler
Senior Member
 
Join Date: Dec 2012
Location: Massillon, Ohio
Posts: 783
Default '41 won't crank when hot

My 1941 starts with no more than 3 rotations. However, drive it for some miles and shut off. If the radiator temperature is above 180 degrees or so the starter won't crank the engine. Push the starter button and all I get is a clunk no cranking. Battery is charging fine. Starter and generator have been rebuilt.
Regulator and condenser check out fine. Open the hood and let it cool down and it fires right up. (?)
Joe Immler is offline   Reply With Quote