The Ford Barn - View Single Post

51woodie · 10-03-2020, 01:48 PM

rotorwrench. Thank you for your response. The end pieces are pressed on, so I can't take it apart. As I see it, the problem is the last three reels are stiff to turn. I have been trying to work clock oil down the keyway in the shaft to lube the reels. I've also been turning the 1/10 reel (a lot) by hand, the get the last three reels to move so I can work to get them freed up.

Any other ideas appreciated.

10-03-2020, 01:48 PM	#3
51woodie Senior Member Join Date: Apr 2018 Location: Chelmsford, ON Canada Posts: 529	Re: '46 Odometer Repair rotorwrench. Thank you for your response. The end pieces are pressed on, so I can't take it apart. As I see it, the problem is the last three reels are stiff to turn. I have been trying to work clock oil down the keyway in the shaft to lube the reels. I've also been turning the 1/10 reel (a lot) by hand, the get the last three reels to move so I can work to get them freed up. Any other ideas appreciated.