The Ford Barn - View Single Post

GregJac · 09-07-2020, 07:20 PM

My 30 Coupe had been juiced years ago with everything from a 48. It worked but was crude... I built a battery box with a mount for a Wilwood dual master cylinder with remote reservoirs. I used a stock brake pedal with a bell crank to actuate the master cylinder. Residual pressure valves are required for the frame type mounting of the master cylinder.
I was able to do everything without drilling any holes or altering it in anymore than the previous change.

09-07-2020, 07:20 PM	#18
GregJac Junior Member Join Date: Jun 2020 Posts: 13	Re: Hydraulic Brake Blunder My 30 Coupe had been juiced years ago with everything from a 48. It worked but was crude... I built a battery box with a mount for a Wilwood dual master cylinder with remote reservoirs. I used a stock brake pedal with a bell crank to actuate the master cylinder. Residual pressure valves are required for the frame type mounting of the master cylinder. I was able to do everything without drilling any holes or altering it in anymore than the previous change.