View Single Post
Old 07-03-2021, 09:39 PM   #15
AnthonyG
Senior Member
 
AnthonyG's Avatar
 
Join Date: May 2013
Location: Pa.
Posts: 2,161
Default Re: Finally starting my ‘35’s juice brake conversion

Spec’s still say 1 1/16”
Must be bored out to accept sleeve with 1 1/16” ID. Speedway, I know many don’t like Them but I haven’t had an issue w anything I’ve gotten. They’ve even taken a return from me & paid for shipping back on an item I screwed up on. I will report back with issues.. I also bought their Drop Forged 37-41 spindles pre-milled to accept Bendix backing plates. I’ll report back on them as well.
__________________
Nomad
AnthonyG is offline   Reply With Quote