Thread: rebuilding a pre-36 steering box - parts interchangeability
View Single Post
Old 11-24-2019, 10:59 AM   #32
Andy
Senior Member
 
Join Date: May 2010
Location: Kerrville, Tx
Posts: 2,771
Default Re: rebuilding a pre-36 steering box - parts interchangeability
Quote:
Originally Posted by Mark from Australia View Post
So that will just mean that the sector shaft will hang out further out of the steering box if fitted to an earlier steering box?
No, It is the other way around. The 35-6 sector is shorter. That is why the swap is impossible.
Last edited by Andy; 11-24-2019 at 04:24 PM.
Andy is offline   Reply With Quote