View Single Post
Old 07-14-2020, 04:31 AM   #13
Senior Member
FrankWest's Avatar
Join Date: Sep 2013
Posts: 2,902
Default Re: supplier of 1933-34 Ford Windshield Rubber

Originally Posted by JM 35 Sedan View Post
Who installed the rubber gasket that tore apart?

My first couple attempts at installing these rubber windshield gaskets did not go well. The first one I tried, I definitely DID NOT have all the old rubber from the previous gasket completely cleaned out of the groove in frame. Then I was NOT using the best tool I could have chosen to push the rubber into the groove. Then I chose the wrong lube to use trying to make the rubber go in place, then finally I determined that I was not putting the right part of the gasket into the channel first. After much frustration, and ruining one gasket I nailed the proper installation procedure and everything worked and went together perfectly.
Unfortunately, I suspect that most folks complaining of having problems, and blaming the manufacturer's product, are actually experiencing user error.
I installed it..
I totally cleaner out the channel, checked every inch. I did not break during the installation but only after a year or so in place. I noticed the separation along the left edge!
FrankWest is offline   Reply With Quote