The Ford Barn - View Single Post

tubman · 03-10-2020, 10:41 AM

I am running 2G's on bored out Merc manifolds on a couple of engines. They run fine with stock jetting. Both engines are larger than normal (255" and 258") and have aftermarket heads and ignition. I believe "Ol' Ron" on this board has also said that stock jet size on a 2G worked well for him also. Not exactly the same but very similar characteristics.

03-10-2020, 10:41 AM	#4
tubman Senior Member Join Date: Dec 2013 Location: Minnesota, Florida Keys Posts: 10,316	Re: Stromberg WW jetting question..... I am running 2G's on bored out Merc manifolds on a couple of engines. They run fine with stock jetting. Both engines are larger than normal (255" and 258") and have aftermarket heads and ignition. I believe "Ol' Ron" on this board has also said that stock jet size on a 2G worked well for him also. Not exactly the same but very similar characteristics. Last edited by tubman; 03-10-2020 at 11:50 AM.