The Ford Barn - View Single Post

DannL · 08-20-2020, 08:22 AM

I suspect the HV cable between the coil and distibutor cap may have problems. The cable is quite new, but the crimps at the ends look poorly done. Someone at the cable bench must have been in a hurry. Also found a loose nut on the generator relay. Looser than expected. Ordered another cable. Will go through the timing this weekend, and have a look under the distributor plate. Took her out last evening. Ran fine.

08-20-2020, 08:22 AM	#42
DannL Senior Member Join Date: Jul 2019 Location: Oklahoma City, OK Posts: 184	Re: Begging to be a hot rod. I suspect the HV cable between the coil and distibutor cap may have problems. The cable is quite new, but the crimps at the ends look poorly done. Someone at the cable bench must have been in a hurry. Also found a loose nut on the generator relay. Looser than expected. Ordered another cable. Will go through the timing this weekend, and have a look under the distributor plate. Took her out last evening. Ran fine. __________________ Not a Purist.