The Ford Barn - View Single Post

BRENT in 10-uh-C · 01-13-2014, 06:30 AM

In the case of an oversized pin, we use drill rod and fabricate the necessary size on a lathe. If you do not have a lathe, you will likely need to find someone who does and have them make it for you.

01-13-2014, 06:30 AM	#3
BRENT in 10-uh-C Senior Member Join Date: May 2010 Location: Eastern Tennessee Posts: 11,516	Re: side mirror hinge pin In the case of an oversized pin, we use drill rod and fabricate the necessary size on a lathe. If you do not have a lathe, you will likely need to find someone who does and have them make it for you. __________________ . BRENT in 10-uh-C . www.model-a-ford.com ...(...Finally Updated!! ) .