['29wagon]

yes, that does look similar to the front cowl connection to the frame. looks like that block does not fit under the foot of that angle brace. so then is there a separate block at the pillar base or does the wood floor rail connect to that end.
the long wood block i have looks like it should fit . the three bolt holes line up with the wood block holes. i am making the side bracket to the frame .
interesting diversities right down to the cowl base.
the books all show that the '28-'29 coupes, roadsters, phaetons, tudor sedans and pickups had the three hole long wood block then in '30 it was shortened and straightened . much different later.
so now was there an earlier third style, much shorter ?
very interesting.
thank you.