View Single Post
Old 07-28-2020, 11:03 PM   #12
Talkwrench
Senior Member
 
Talkwrench's Avatar
 
Join Date: Aug 2012
Location: Perth, Western Australia
Posts: 2,687
Default Re: Strange "Clanking Noise" at Idle

Quote:
Originally Posted by ilgrilleto View Post
Sorry for the stupid question, but am I able to get to the flex plate bolts with the Engine and Transmission installed in the car?
Yes if its an early air cooled there should be a plate at the front unbolt it and you can check each bolt as they'll be a few as the torque converter is bolted together. you'll have to turn the engine over to get to each lot.
__________________
"Came too close to dying to stop living now!"
Talkwrench is offline   Reply With Quote