View Single Post
Old 05-16-2020, 10:32 AM   #7
redmodelt
Senior Member
 
redmodelt's Avatar
 
Join Date: May 2010
Location: Portland OR
Posts: 6,339
Default Re: Now What, should this be???

It goes between the pump and fan, so the pump needs to come off to install and will need to remove fan from shaft. At an 1/8" I would not worry at this point unless you want to. Without knowing what fan you have on the car; You would ether have to pull the radiator/hood if 4 blade or remove hood, lean the radiator forward to get pump out if 2 blade to install the collar. If you go the lean forward, put a piece of cardboard between the radiator and end of fan shaft to prevent damage to the core.
__________________
I know the voices aren't real but damn they have some good ideas!
redmodelt is offline   Reply With Quote