The Ford Barn - View Single Post

100IH · 01-25-2020, 11:51 AM

You just said there was a difference in length. There is an early spindle but the difference is not the length, it is the inner flange where the backing plate mounts. The longer spindle is likely wrong if I understand your issue with the bearings. Flathead V8 spindles look similar and there are probably more versions than 2. On the Model A right and left are interchangeable.

01-25-2020, 11:51 AM	#2
100IH Senior Member Join Date: Dec 2011 Location: SW Idaho Posts: 970	Re: Different front spindles? You just said there was a difference in length. There is an early spindle but the difference is not the length, it is the inner flange where the backing plate mounts. The longer spindle is likely wrong if I understand your issue with the bearings. Flathead V8 spindles look similar and there are probably more versions than 2. On the Model A right and left are interchangeable.