The Ford Barn - View Single Post

1Tudoor · 02-19-2016, 10:52 AM

All of the above & not a bad idea to remove the plugs & see what they look like ---clean them w/ a brass brush & re gap if needed. At the same time put a small amount of oil in the cylinders to help compression & lubrication .
BTW, that's a nice looking PU !

02-19-2016, 10:52 AM	#5
1Tudoor Senior Member Join Date: Jan 2016 Location: Upstate in NY's beautifull hills Posts: 173	Re: Where next All of the above & not a bad idea to remove the plugs & see what they look like ---clean them w/ a brass brush & re gap if needed. At the same time put a small amount of oil in the cylinders to help compression & lubrication . BTW, that's a nice looking PU !