The Ford Barn - View Single Post

Tom Wesenberg · 08-19-2021, 03:04 PM

Make sure the flywheel housing is dialed in, and if that's good then I'd check second gear for being too loose on the shaft or having worn teeth.

08-19-2021, 03:04 PM	#8
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Transmission and shifter Make sure the flywheel housing is dialed in, and if that's good then I'd check second gear for being too loose on the shaft or having worn teeth.