Quote:
Originally Posted by 36FiveWindowCoupe
What are the "slight modifications" Brian from NZ
|
There is a "no brainer" answer to this. Swap '37-'40 spindles onto your '36 axle. It's a "bolt-on" if you use king pins matching year of spindles. Even the tie rod and drag link will bolt-up! Easy-peasy!!
We're swapping '40 drums onto a '37 Coupe as we speak, to get rid of the wide-fives and make tire selection much easier. You can bolt-on '40-'48 16" wheels and caps, or in our case, 15" early F-100 wheels which take the same '40-'48 hub caps. DD
.