The Ford Barn - View Single Post - 3 on the tree t56 gear box r10 0d problem

unclevinny · 06-26-2019, 11:25 AM

yes i start it and try it with the linkage off and manually shift it with just the tranny lever i try it with linkage hooked up and all the same results reverse if off the floor but not when i set it down 1st second and high work fine though the od lever has been pulled out several times and when i use od position like pushed in and selinod is activated to od i try reverse very slightly and it reacts properly like trys to lock up so i fuss with that and it comes loose so i just cant figure it out !!

06-26-2019, 11:25 AM	#5
unclevinny Member Join Date: Apr 2014 Location: Montana Posts: 65	Re: 3 on the tree t56 gear box r10 0d problem yes i start it and try it with the linkage off and manually shift it with just the tranny lever i try it with linkage hooked up and all the same results reverse if off the floor but not when i set it down 1st second and high work fine though the od lever has been pulled out several times and when i use od position like pushed in and selinod is activated to od i try reverse very slightly and it reacts properly like trys to lock up so i fuss with that and it comes loose so i just cant figure it out !!