The Ford Barn - View Single Post

Clem Clement · 03-16-2021, 02:08 PM

I am struggling with a replacement dash light dimmer from Carpenter. The bullet ends don't fit in the pockets. They have a brass sleeve installed. Also the 2 wires from the wiring harness are very short.

03-16-2021, 02:08 PM	#10
Clem Clement Senior Member Join Date: May 2010 Location: Fairfax, VA Posts: 3,393	Re: '40 Headlight switch I am struggling with a replacement dash light dimmer from Carpenter. The bullet ends don't fit in the pockets. They have a brass sleeve installed. Also the 2 wires from the wiring harness are very short.