Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by Big hammer
On my late 31 Tudor just above the screws both sides about 1 1/4 was spot welded. I used a home made stainless steel puddy knife and separated the visor from the pillar. I did not spot welded it back.
|
Quote:
Originally Posted by Tom Endy
Many thanks to those that responded. We found a spot weld on each side 1.25" above the screw. We cut the weld with a die grinder and got the visor and the metal header off.
Tom Endy
|
Mine was spot welded just like you described.