The Ford Barn - View Single Post

oldford · 07-14-2011, 06:29 PM

How much torque do you put on a front bearing spindle nut. I know you tighten it down till all the grease is out than back off to the next notch on the nut. But what if that next notch is to tight.

07-14-2011, 06:29 PM	#1
oldford Senior Member Join Date: Jul 2010 Posts: 102	How much torque on a spindle nut How much torque do you put on a front bearing spindle nut. I know you tighten it down till all the grease is out than back off to the next notch on the nut. But what if that next notch is to tight.