11-23-2017, 01:19 AM
|
#9
|
|
Senior Member
Join Date: May 2010
Location: Portland, Oregon
Posts: 5,912
|
Re: Piston Slap
Quote:
Originally Posted by Kohnke Rebabbitting
Piston slap comes from Rods out of alignment. Twist, Bend, and Offset. Wrist pin clearance, wrist pins not at a right angle to the bore. Cylinders not at a right angle to the crank.
Loose pistons by them selves seldom cause problems.
Herm.
|
Herm, can piston slap be positively identified with an engine stethoscope?
__________________
Ray Horton, Portland, OR
As you go through life, keep your eye on the donut, not the hole.
|
|
|