Thread
:
Need some advice on carburetor linkage...
View Single Post
01-15-2021, 05:23 PM
#
10
scicala
Senior Member
Join Date: Jun 2010
Location: Detroit suburb, MI
Posts: 3,706
Re: Need some advice on carburetor linkage...
Good Job Daniel. Also, with the Holley, if you put the linkage rod to the carb in the hole that is lower on the carb throttle lever, it will require less travel distance at the carb to get to WOT.
Sal
scicala
View Public Profile
Send a private message to scicala
Find More Posts by scicala