View Single Post
Old 01-15-2014, 05:49 PM   #2
Senior Member
Terry,NJ's Avatar
Join Date: Nov 2013
Location: Northern Bucks Co. Pa
Posts: 632
Default Re: 1930 Tudor header board size?

First off, Headers are not made from a single piece of wood. They are a conglomeration of about 3 or 4 pieces. I don't advise you to make your own if you don't have a pattern. That being said, I measured my semi-installed one in my Town Sedan. These figures are rough (Semi installed) Although the height is pretty near correct at 3 inches. The width is 47 inches. The front is an angle starting at 3 1/2" at the top and about 2 inches at the bottom. The most favored wood is Ash. Good luck!
Terry,NJ is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)