View Single Post
Old 08-01-2020, 10:36 AM   #4
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 11,928
Default Re: 1934 pickup horn : Who repairs these Sparton hornss

Corrosion of internals and mountings are the biggest killers of horns. If the parts are all intact with little or no corrosion then it would likely only need careful cleaning of the vibrator points. If the vibrator coil goes bad, they can generally be rewound as long as the same gauge wire with the same number of turns is utilized. These things were factory set to pull a set amount of amperage so be careful with adjustments unless you know what the OEM specs are. There are likely several shops out there that can rebuild horn vibrators. A search of the early V8 club magazine or Hemmings should bring up a few.
rotorwrench is offline   Reply With Quote