Thread: Horn Wiring
View Single Post
Old 08-01-2020, 09:16 AM   #14
Badpuppy
Senior Member
 
Join Date: Dec 2017
Location: Guthrie, OK
Posts: 688
Default Re: Horn Wiring

The horns of the time were probably all series wound as Tom W says above, and polarity shouldn't matter. Your converter should be capable of at least 6 amps output, but a smaller one would probably work ok for a few honks at a time. There should also be a screw for tone adjustment. 18 gauge is sufficient, larger is ok.

(So what it's an 8-year-old thread. Still on-topic. No biggie.)
Badpuppy is offline   Reply With Quote