View Single Post
Old 07-31-2020, 01:57 PM   #3
Mike Peters
Senior Member
 
Mike Peters's Avatar
 
Join Date: Aug 2012
Location: South East Wisconsin
Posts: 834
Default Re: Parking braking help !

Sponsored Links (Register now to hide all advertisements)
You may need to resort to the hot wrench (Acetylene torch) to remove the toggle lever from the e brake shaft on the rear backing plate. Remove nut and bolt. A half round key on the shaft keeps it from turning. Get it good and hot and pry it off. This should only be a last ditch effort after everything else fails. Toggle levers are left and right. Don't get them mixed up when installing. The shaft will then come out from the outside.
Mike Peters is offline   Reply With Quote