Thread: Distributor
View Single Post
Old 07-30-2020, 04:31 PM   #7
john in illinois
Senior Member
john in illinois's Avatar
Join Date: May 2010
Location: Illinois
Posts: 1,939
Default Re: Distributor

Like Chuck said tighten the set screw snug,not tight and hold it with a screw driver so the lock nut does not tighten it further. Too tight an the distributor can get distorted and the bushing will . Seize. Brattons catalog has this information. a friend locked up his distributor.

Best to error on the loose side,the pin will hold it.

Welcome each day
john in illinois is offline   Reply With Quote