View Single Post
Old 08-25-2019, 09:34 AM   #24
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 11,958
Default Re: 1931 Murray fordor rear door ?

Photos are a good thing for identification. The lightly arched side windows were definitely a characteristic of the Murray bodies. Straight top side windows were all Briggs characteristics. All knowledge that is good toward getting one of these cars correct.

This is on a 1930 but the bodies are a lot alike. https://www.fordmodela.com/restorati...-wood-fitting/
There are metal pieces that cover the area and those can be seen in the photos. They have three holes in the photos. The wood was likely replaced at some point and just not finished.
rotorwrench is offline   Reply With Quote