The Ford Barn - View Single Post

DNLs1930 · 08-09-2020, 03:05 PM

I tried to search for the conversation about installing a fuse in the alternator/generator wire with no luck so starting a new thread.

I have installed a 6V alternator after a generator failure (pending rebuild) and in the process read about some installing a fuse between the Alt/Gen and the junction box on the firewall. I have the safety fuse mounted on the starter but the conversation was about the Alt continuing to feed power even after the safety fuse opened.

Thoughts? Experience?

THANKS IN ADVANCE...

08-09-2020, 03:05 PM	#1
DNLs1930 Senior Member Join Date: May 2019 Location: Fort Worth side of DFW Posts: 171	ALT Fuse I tried to search for the conversation about installing a fuse in the alternator/generator wire with no luck so starting a new thread. I have installed a 6V alternator after a generator failure (pending rebuild) and in the process read about some installing a fuse between the Alt/Gen and the junction box on the firewall. I have the safety fuse mounted on the starter but the conversation was about the Alt continuing to feed power even after the safety fuse opened. Thoughts? Experience? THANKS IN ADVANCE...