Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by M2M
|
Quote:
Originally Posted by Charlie Stephens
Two things to check. Be sure that it hasn't been milled enough to allow the piston to hit the head (like the one in the picture) and look for cracks. Pay particular attention to where the arrows are in the attached picture. You should probably run a Model B head gasket to match the shape of the combustion chamber. How about a picture of the other side?
Charlie Stephens
|
Charlie, do you mean that the head I posted above has been milled too much, or the head you posted?
I put a photo of each side above.