Quote:
Originally Posted by elwood
Hey guys, Im repairing a set of doors, one of them the inner and outter skins are bad for around 2 to 3 inches up,
so i cut the skins off, as lest as possible, did the corner repairs, when test fitting the outter skin patch, and i can already tell that the outter skin on the door is wanting to curl inwards at the cut off.
how the heck do i get the original door metal to raise back up to meat the patch panel without having a dip at the seam ?
|
I just finished the doors on my 34 pickup. I replaced the skin from just below the ribs down. The ribs held the shape well so I could butt weld the new piece in. No warp at all.