The Ford Barn - View Single Post

Zeke3 · 12-23-2020, 11:01 AM

The weld won't stick to the copper, so the copper can be used to backup the seam of the two pieces being joined. I also use a flattened piece of copper tubing to backup holes when filling them or starting a weld at an edge.

12-23-2020, 11:01 AM	#5
Zeke3 Senior Member Join Date: Dec 2014 Location: Columbus, IN Posts: 1,406	Re: 34 door help The weld won't stick to the copper, so the copper can be used to backup the seam of the two pieces being joined. I also use a flattened piece of copper tubing to backup holes when filling them or starting a weld at an edge.