Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by Tom-MI
This should be easy.
Remove the window frame and pull back the top of the door panel about an inch. You should see two raised humps in the door metal with holes. shove nails through the door panel to mark each hole. Use 1/8"x 3/4" oval-head sheet metal screws to attach the robe. Sometimes the holes have been enlarged over time requiring a wider screw. If painted I use a dish washer/cup between the screw bottom and the rope end piece to avoid cracking the paint.
|
I am surprised with the angle of your armrest. Is your car a 35? Is that correct?
I was going to install my new armrest in a straight line, parallel to the top of the door frame.