[Dale G.]

When I did Fine Point on my Tudor, I rolled black dum dum into a ball slightly larger than the hole in the distributor, found a tube the same inside diameter as the hole, and with luck found a dowel the same size as the inside diameter of the tube. I took the ball of dum dum, stuffed it into the tube, then with the dowel, I plunged it through the tube into the distributor hole. The result was it looked like that archive picture, a black button, of course it took a couple of tries to get it to my liking but passed judging just fine. Since that time I have done on two other Fine Point cars. I use it this way in all of my driving cars because it keeps the water and dirt out of the distributor and is heat resistant. I just roll dum dum into a ball slightly larger than the hole and push it in with my thumb. You have to get creative.