Quote:
Originally Posted by alt63bird
How did you get the bushing out? I've had mine installed from the wrong side for 30 years now and think maybe it's time to do it right.
|
I used an air chisel and a lot of finesse on the lip of the bushing itself. As you can tell from the photo, there is quite a bit of the bushing protruding enough from the control arm to let you get an air chisel on the lip at a decent angle. If this was being removed from the INSIDE of the arm there would be no way an air chisel would work.
If you look back through some of my posts you can see how I removed the bushings from these arms. I "think" I posted a few photos.