Quote:
Originally Posted by Dick Deegan
I took Hoarsewhisperer's advice and referred to the previous thread on this subject. I did not know that the oil filler tube had to be oriented in a particular way with the bottom baffle facing downward. I checked mine and, sure enough, it was pointing almost up. Fixed that in a hurry.
HoarseWhisperer (you should change your handle - it's too difficult to type - my fingers are sore) and bogdonj - do you have any concerns about small pieces of stainless steel from the pot scrubber in the cap getting into the oil in the pan?
Dick
|
I have no worries about the pad breaking apart and getting into my engine. It's securley put in place and if it did happened to come loose for no reason it would be extremely hard for it to get past the baffles in the pipe.