The Ford Barn - View Single Post

Charlie Stephens · 11-06-2014, 05:13 PM

Good question for HAMB. First I assume you mean a '30-'31 Model A. If you have a '28-'29 my suggestion would be to forget it. On the '30-'31 you will find that the radiator neck is in the wrong location and has to be moved or cut off and another inlet installed under the hood. The hood hinge will have to be dealt with as the Model A is a rod and the '32 is a formed stainless steel strip.

Charlie Stephens

11-06-2014, 05:13 PM	#2
Charlie Stephens Senior Member Join Date: May 2010 Location: Southern California Posts: 7,320	Re: 1932 Radiator Shell and Grill Question Good question for HAMB. First I assume you mean a '30-'31 Model A. If you have a '28-'29 my suggestion would be to forget it. On the '30-'31 you will find that the radiator neck is in the wrong location and has to be moved or cut off and another inlet installed under the hood. The hood hinge will have to be dealt with as the Model A is a rod and the '32 is a formed stainless steel strip. Charlie Stephens