The Ford Barn - View Single Post

JM 35 Sedan · 10-31-2014, 08:36 AM

As Terry said, the rotors are now being reproduced. The crab caps that Bob Drake is now selling will also work on the H&C, although the firing order numbers printed on front of the cap will be incorrect for H&C, but they could be remarked. The guy who is reproducing the rotor is also planning to reproduce the inner plastic part. Bendix points for these distributors can be purchased at aircraft service facilities.

Here are some previous posts on H&C distributors:

http://www.fordbarn.com/forum/showth...collins+rotors

http://www.fordbarn.com/forum/showth...harman+collins

http://www.fordbarn.com/forum/showth...harman+collins

10-31-2014, 08:36 AM	#33
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,876	Re: Flow problems with eddie meyer head As Terry said, the rotors are now being reproduced. The crab caps that Bob Drake is now selling will also work on the H&C, although the firing order numbers printed on front of the cap will be incorrect for H&C, but they could be remarked. The guy who is reproducing the rotor is also planning to reproduce the inner plastic part. Bendix points for these distributors can be purchased at aircraft service facilities. Here are some previous posts on H&C distributors: http://www.fordbarn.com/forum/showth...collins+rotors http://www.fordbarn.com/forum/showth...harman+collins http://www.fordbarn.com/forum/showth...harman+collins __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein* Last edited by JM 35 Sedan; 10-31-2014 at 09:04 AM.