The Ford Barn - View Single Post

Ol' Ron · 10-30-2014, 03:43 PM

I do mine in a lathe now, however I did them in a vice with a fixture I made out of wood to hold the guide while I ran the knurling tool, and the reamer. Most auto machine shops should have the tools

10-30-2014, 03:43 PM	#8
Ol' Ron Senior Member Join Date: May 2010 Location: Chester Vt Posts: 8,985	Re: Flathead exhaust valve guide seals I do mine in a lathe now, however I did them in a vice with a fixture I made out of wood to hold the guide while I ran the knurling tool, and the reamer. Most auto machine shops should have the tools