The Ford Barn - View Single Post - Front seat removal, 31 slant window, 4 door

denver9 · 10-27-2014, 10:31 PM

Thanks Jim,
That sounds like an easy remedy. Will do that tomorrow.
While waiting for a reply to my post, I removed the seat frame from the sliding part of the track and moved it back to the next set of holes. that left me with only 3 screws on each side instead of 4. Also I would have had to shorten the spring you referred to. I like your idea better. thanks again
When you moved the seat latch did you drill 2 new holes so you would still have 4 bolts holding the latch or is there even room to do that?
-Denver

10-27-2014, 10:31 PM	#4
denver9 Member Join Date: Mar 2012 Location: Hemet, Ca Posts: 55	Re: Front seat removal, 31 slant window, 4 door Thanks Jim, That sounds like an easy remedy. Will do that tomorrow. While waiting for a reply to my post, I removed the seat frame from the sliding part of the track and moved it back to the next set of holes. that left me with only 3 screws on each side instead of 4. Also I would have had to shorten the spring you referred to. I like your idea better. thanks again When you moved the seat latch did you drill 2 new holes so you would still have 4 bolts holding the latch or is there even room to do that? -Denver Last edited by denver9; 10-27-2014 at 10:33 PM. Reason: clarification