The Ford Barn - View Single Post

fordson · 10-20-2014, 06:15 PM

Thanks David, once again excellent information !!
Thanks for all the answers and suggestions.

fordcpe: How come your one is black and not aluminum colour ?? Painted black ??

From the answers, i understand that:
1) the channel in the roof is to be filled level with the sealer / plastic substitute from Le Baronneys.
2) Canvas covers the chicken wire and extends to the channel, beeing tacked.
3) Padding on canvas and black outer vinyl cover to be exended to the channel
4) Aluminum molding gets placed and screwed / tacked ontop the sealer filled channel. Basically sandwiching the canvas and outer black vinyl cover.

It should look like this then, either in aluminum or ( originally) painted black:

10-20-2014, 06:15 PM	#7
fordson Senior Member Join Date: Oct 2010 Location: Switzerland/South Africa Posts: 224	Re: Correct Tack Strip for 33 / 34 Ford Thanks David, once again excellent information !! Thanks for all the answers and suggestions. fordcpe: How come your one is black and not aluminum colour ?? Painted black ?? From the answers, i understand that: 1) the channel in the roof is to be filled level with the sealer / plastic substitute from Le Baronneys. 2) Canvas covers the chicken wire and extends to the channel, beeing tacked. 3) Padding on canvas and black outer vinyl cover to be exended to the channel 4) Aluminum molding gets placed and screwed / tacked ontop the sealer filled channel. Basically sandwiching the canvas and outer black vinyl cover. It should look like this then, either in aluminum or ( originally) painted black: Last edited by fordson; 05-02-2019 at 03:41 PM.