The Ford Barn - View Single Post

41ford1 · 09-22-2014, 04:06 PM

It is a bit surprising this engine ran as good as it did until the knock showed up. The head work is in progress. Hardened seats, valve guides are on the list for that. I found out today that the block needs a sleeve. One cylinder was cracked. When all is done it will be a 227".

09-22-2014, 04:06 PM	#31
41ford1 Senior Member Join Date: May 2010 Location: ManchVegas, New Hampshah Posts: 1,591	Re: Sympathy pains for Old Henry It is a bit surprising this engine ran as good as it did until the knock showed up. The head work is in progress. Hardened seats, valve guides are on the list for that. I found out today that the block needs a sleeve. One cylinder was cracked. When all is done it will be a 227". __________________ You are never to old to enjoy your childhood. Forty1fordpickup on the HAMB.