The Ford Barn - View Single Post

supereal · 09-19-2014, 11:35 AM

The stock Ford distributor has a built in advance of 5 degrees when the tang is properly engaged in the cam slot. The slider on the side will vary the adjust the advance a few degrees, but most run fine at the maximum travel of the slider.

09-19-2014, 11:35 AM	#18
supereal Senior Member Join Date: Jul 2014 Location: Iowa Posts: 1,634	Re: allen syncrograph / 37 ford The stock Ford distributor has a built in advance of 5 degrees when the tang is properly engaged in the cam slot. The slider on the side will vary the adjust the advance a few degrees, but most run fine at the maximum travel of the slider.