The Ford Barn - View Single Post

flatjack9 · 09-17-2014, 01:03 PM

Your problem is in the carburetor, not the ignition. If you can't idle lower than 650 rpm, you've got an air leak somewhere. Could be the throttle plates are not seating properly for one thing. What happens when you adjust the idle screws?

09-17-2014, 01:03 PM	#2
flatjack9 Senior Member Join Date: May 2010 Location: Oshkosh, Wi Posts: 4,608	Re: allen syncrograph / 37 ford Your problem is in the carburetor, not the ignition. If you can't idle lower than 650 rpm, you've got an air leak somewhere. Could be the throttle plates are not seating properly for one thing. What happens when you adjust the idle screws?