The Ford Barn - View Single Post

Vonn Ditch · 09-10-2014, 08:45 AM

Ok got it. The rods are indeed marked 1 through 8. A wire brush is your friend. Thanks Walt. And......there is a small "bump" on top of the front main with the offset bolt holes. My apple crate full of parts are now all matched up on the bench waitin' to see if the block will pass the pressure test. Thanks to all.

09-10-2014, 08:45 AM	#12
Vonn Ditch Member Join Date: Mar 2014 Posts: 74	Re: Help with this 8BA Ok got it. The rods are indeed marked 1 through 8. A wire brush is your friend. Thanks Walt. And......there is a small "bump" on top of the front main with the offset bolt holes. My apple crate full of parts are now all matched up on the bench waitin' to see if the block will pass the pressure test. Thanks to all.