The Ford Barn - View Single Post - T-5 to flathead won't shift into gear with engine running.

donald1950 · 08-20-2014, 05:31 PM

bite the bullet and pull the trans and remove the preasure plate then slip the disk on the input shaft and you will find the disk is bottoming out on the input shaft splines. all what you say is exactly what i have gone through. that is what is locking up.....

08-20-2014, 05:31 PM	#34
donald1950 Senior Member Join Date: May 2010 Location: san antonio, texas Posts: 461	Re: T-5 to flathead won't shift into gear with engine running. bite the bullet and pull the trans and remove the preasure plate then slip the disk on the input shaft and you will find the disk is bottoming out on the input shaft splines. all what you say is exactly what i have gone through. that is what is locking up.....