View Single Post
Old 08-12-2014, 08:18 AM   #7
36tbird
Senior Member
 
Join Date: May 2010
Location: nw SanAntonio, TX
Posts: 940
Default Re: adjusting 3 / 2's

Phil, you are right to address this issue. I had a friend who ran 3x2 with straight linkage. It ran very rich to the point that it carboned up the valve seats excessively. Finally one valve top broke off due to the carbon build up and the now loose valve top destroyed the valve seat area as it careened around in there. Block was a total loss.
36tbird is offline   Reply With Quote