View Single Post
Old 08-07-2014, 03:10 PM   #4
Mark Slight
Senior Member
 
Mark Slight's Avatar
 
Join Date: May 2010
Location: Dixon, CA
Posts: 473
Default Re: flathead V8 on engine lift

Houbill,

Yes you can, however I would suggest you build a wooden frame around the engine so it sets on the side of the pan & front and rear not the bottom. If you set it on the bottom of the pan depending how far you are traveling and if it moves or not you could damage the bottom of the pan and the oil pickup.

I'm sure others will have suggestions also.

Mark
Mark Slight is offline   Reply With Quote