[Dave in Spokane]

Thanks everyone,
This is not a little from the over flow, this is bubbling like boiling water (had the radiator cap off) even before the water got hot and water out the exhaust. Sure makes sense to be because of pulling the head and lack of getting it to seal again. It has sat over night so the water should have separated out of the oil and I did notice the water came out first last time. I will try that trick and not go to all the work of pan removal. I did not notice any cracks in either the head or the block the last 3 times I have had the head off this week but you know how that goes. This seems to be a big leak? I will find some of the hi-temp copper RTV and give that a try. I have one head gasket left before I just pore a can of gas over the whole rig. Our big early Ford swap meet is in two days and the truck is all loaded with my collection of (27) 1/8 scale "32 / T models still in the box and 3 sets of vintage IROC / Z28 wheels. Thanks for the help but watch for the smoke on the horizon!! Any body want to buy a neat old truck before the fire sale? Dave