Quote:
Originally Posted by JM 35 Sedan
The Brusegard (sp?) upper steering column bearing is the Cadillac of these upper column bearings being offered, but for those not willing to spend that many $$'s there are other lower cost ball bearings that also work well. One is still offered by FoMoCo but I don't have that part number handy. The other option, that I am aware of, is a flanged ball bearing with the correct ID & OD. It is actually a wheelbarrow wheel bearing available at TSC for about $3.00 to $4.00. I will edit this post later with that part number.
These previous posts listed below have pictures and part numbers of these bearings.
http://www.fordbarn.com/forum/showth...column+bearing
http://www.fordbarn.com/forum/showthread.php?t=61577 |
I would be against using wheelbarrow bearings, we go through them in a short time at work. Some bearing companies make a better grade bearing with the same specs as tsc. omho